Gas Safe Register LogoGas Safe Registered•CheckatradeApproved
    FacebookCALL: 07863 782608
    Owens Gas Services Logo
    07863 782608
    Back to all articles

    No Heating or Hot Water in Lichfield? What to Check First

    18 October 2026 Owens Gas Services
    No Heating or Hot Water in Lichfield? What to Check First

    Waking up to a cold home and no hot water is a stressful way to start the day. For households in Lichfield, a few safe checks can often save an unnecessary callout, while knowing when to call a professional helps you get warmth back sooner. This guide explains what to look at first and when to arrange Boiler Repairs.

    Simple Checks You Can Make Safely

    Before contacting anyone, a few basic checks are worth doing. None of these involve opening the boiler or touching gas components, so they are safe for any householder to carry out.

    • Check the boiler has power and the display is lit
    • Check the pressure gauge reads between 1 and 1.5 bar when the system is cold
    • Make sure the thermostat is set to a temperature above the current room temperature
    • Confirm the timer or programmer has not been accidentally changed
    • Check that any external controls or smart thermostat batteries are working

    If these checks do not resolve the problem, or you notice anything unusual such as a smell of gas or a yellow flame, stop and contact a Gas Engineer Walsall rather than attempting any repairs yourself.

    Common Reasons for No Heating or Hot Water

    A boiler can stop working for many reasons, and the same symptom can have several different causes. Loss of pressure, a faulty pump, a failed ignition, a blocked condensate pipe or a sensor fault can all leave you without heating or hot water.

    Because the cause is not always obvious, professional diagnosis is the safest route to a lasting Boiler Repair rather than guessing at parts.

    A Drop in System Pressure

    If the gauge has fallen to zero, the boiler will often lock out for safety. Pressure loss can come from a leak, a passing relief valve or a failed expansion vessel. Your engineer can trace the cause and repair it rather than have you keep topping up.

    A Faulty Pump or Stuck Valve

    Even when the boiler fires, a failed circulation pump or a stuck diverter valve can stop heat reaching your radiators and taps. These faults usually require a qualified engineer to diagnose and put right.

    Ignition or Sensor Faults

    A boiler that tries to ignite but fails, or shows an error code and locks out, may have a faulty ignition component or sensor. Repeatedly resetting the boiler is not a fix and can mask an underlying fault that needs professional attention.

    When It Becomes an Emergency

    Most loss of heating is inconvenient rather than dangerous. But a suspected gas leak, a yellow or orange flame rather than a crisp blue one, soot marks around the boiler, or a smell of gas are all reasons to act immediately.

    In those situations, turn off the gas supply and contact a Gas Safe registered engineer without delay. Emergency Boiler Repairs from a qualified engineer are the right course of action.

    Why Professional Diagnosis Matters

    Gas appliances must only be worked on by a competent person registered with Gas Safe Register. Attempting to repair, adjust or dismantle a boiler yourself is unsafe. A qualified heating engineer can identify the true cause, carry out the correct repair and advise whether the boiler remains reliable. Keeping up with regular Boiler Servicing can also help reduce the chance of a sudden breakdown. Owens Gas Services provides Gas Services Walsall and supports homeowners across Lichfield and the surrounding areas.

    No Heating or Hot Water in Lichfield?

    If the simple checks have not solved it, our Gas Safe registered engineers can diagnose the fault and get your heating and hot water back safely.

    Frequently Asked Questions

    What should I check before calling an engineer for no heating?

    Confirm the boiler has power and the display is lit, check the pressure gauge sits between 1 and 1.5 bar when cold, and make sure the thermostat and timer are set correctly. If the problem remains or anything seems unsafe, contact a Gas Safe registered engineer.

    Is losing heating and hot water an emergency?

    Loss of heating is inconvenient rather than dangerous, but a suspected gas leak, a yellow or orange flame, or scorch marks are emergencies. Turn off the gas supply and seek immediate professional help in those cases.

    Can I reset my boiler myself?

    Following the manufacturer reset procedure is generally fine for a one off lockout. If the boiler keeps locking out or showing the same error code, stop resetting it and call a Gas Safe registered engineer to diagnose the underlying fault.

    Need plumbing assistance?

    Our expert team is ready to help with your next project.

    07863 782608
    Avatar
    Hi there! Have a question? Chat with us.
    Avatar
    Hi there! Have a question? Chat with us here.